Source location estimation using single station three-component seismic date - Ineris - Institut national de l'environnement industriel et des risques Access content directly
Conference Papers Year : 2001

Source location estimation using single station three-component seismic date

Abstract

An experimental microseismic monitoring system composed of one three component station has been set up overlying the last iron mine in France. This experiment consisted of recording the seismic signals corresponding to the localised underground roof fall following the blasting of some small pillars 300 meters deep. The a priori knowledge of the position sources allows the application and validation of the seismic wave rotation technique to estimate the position of the microseismic events recorded at a single three component station. The method used is based on the calculation of the covariance matrix in a time window. However the length of this window significantly affects the precision of the calculations. The method used involves a new approach in which the length of the time window was optimised on the basis of the dominant frequency in the seismic signal. This article describes the approach to optimise the convergence process between numerical results and geometrical field assessment of experiment.
Fichier principal
Vignette du fichier
2001-018_hal.pdf (665.98 Ko) Télécharger le fichier
Origin : Files produced by the author(s)
Loading...

Dates and versions

ineris-00972215 , version 1 (03-04-2014)

Identifiers

  • HAL Id : ineris-00972215 , version 1
  • INERIS : PU-2001-018

Cite

Mohamad Khir Abdul-Wahed, Gloria Senfaute, Jack-Pierre Piguet. Source location estimation using single station three-component seismic date. International symposium of the international society for rock mechanics (EUROCK 2001), Jun 2001, Espoo, Finland. ⟨ineris-00972215⟩
79 View
829 Download

Share

Gmail Facebook X LinkedIn More