A new method to quantify the leakage scenarios (frequencies andu flowrates) on hydrogen high pressure components
Résumé
This work is part of the MULTHYFUEL E.U. research program [1] aiming at enabling the implementation
of hydrogen dispersers in refuelling stations. One important challenge is the severity of accidents
due to a leakage of hydrogen from a dispenser in the forecourt. The work presented in this paper deals
with the quantification of the leakage scenarios in terms of frequencies and severities.
The risk analysis exercise, although performed by experts, showed very large discrepancies between
the frequencies of leakages of the same categories and even between the consequences. A large part of
the disagreement comes from the failure databases chosen as shown in the paper. The mismatch between
the components on which the databases have been settled and the actual hydrogen components may be
responsible for this situation. However, as it stands, limited confidence can be laid on the outcome of
the risk analysis.
A new method is being developed to calculate the frequencies of the leakage and the flowrate based on
an accurate description of each component and of each hazardous situation. For instance, the possibility
for a fitting to become untight due to pressure cycling is modelled based on the contact mechanics.
Human errors can also be introduced by describing the tasks. In addition of the description of the method,
the application to a disperser is proposed with some comparison to experiments. One of the outcomes
is that leakage cross sections can be much larger than expected.